Skip to content
Log in

Stone Piece Slab Fit Check

Screen one rough rectangular blank against a usable slab in the entered orientation and after a 90-degree rotation; report the tightest signed dimensional margin for each.

Inputs

Project inputs

Range: at least 0.01 in

Enter measured usable length after removing defects and planned edge trim. This is a rectangular bound, not the full irregular slab outline.

Range: at least 0.01 in

Enter measured usable width after removing defects and planned edge trim. This is a rectangular bound, not the full irregular slab outline.

Range: at least 0.01 in

Enter the required rough blank dimension, including cut kerf, edge cleanup, and finishing stock. Do not enter finished dimensions unless no extra stock is required.

Range: at least 0.01 in

Enter the required rough blank dimension, including cut kerf, edge cleanup, and finishing stock. Do not enter finished dimensions unless no extra stock is required.

Enable only when stone direction, vein match, design, and shop drawing allow the blank to rotate.

Result

Tightest dimensional margin, rotated
—
Tightest dimensional margin, entered orientation
—
Entered orientation
—
90-degree rotation
—
Fit result under rotation setting
—