Skip to content
Log in

Stone Veneer Wall Accessory Takeoff

Estimate lath sheets/packages and whole stock lengths of weep screed and casing bead from product coverage and project runs.

Inputs

Project inputs

Range: at least 0.01 ft2

Use measured wall area after openings from the wall-area takeoff.

Range: at least 0.01 ft2

Use one sheet coverage after the product/system-required laps.

Range: at least 0.01 ft2

Use coverage for the actual sellable package after required laps. It should agree with the same product sheet coverage multiplied by whole sheets per package.

Range: at least 0 %

Enter project-specific cut waste beyond the net sheet/package coverage. Enter 0 only when intentionally estimating no additional waste.

Range: at least 0 ft

Enter the run required by the selected assembly and project details. Enter 0 only after confirming it is not used.

Range: at least 0.01 ft

Use the selected product stock length.

Range: at least 0 ft

Enter the run required by the selected assembly and project details. Enter 0 only after confirming it is not used.

Range: at least 0.01 ft

Use the selected product stock length.

Range: at least 0 %

Enter an allowance for cuts and piece-end overlap from the approved layout. Enter 0 only when intentionally estimating no extra.

Result

Casing bead run added by allowance
—
Lath area added by allowance
—
Weep screed run added by allowance
—
Casing bead run with allowance
—
Lath area with allowance
—
Weep screed run with allowance
—
Whole casing bead lengths
—
Casing bead length above target
—
Package coverage above target
—
Weep screed length above target
—
Whole lath packages to purchase
—
Sheet equivalents per package
—
Whole lath sheets needed
—
Total casing bead length purchased
—
Net coverage represented by packages
—
Total weep screed length purchased
—
Whole weep screed lengths
—